Wall mounted Emergency eyes-washing. The product composes of a wall support, a bowl and two spigots. The bowl and the spigots are located on the top of the AISI 304 stainless steel wall support. The support of the spigots is inside the ABS bowl. The spigots and their support are made of chromed brass tube. The water supply must ensure a minimum flow of eyes-washing of 6l/min. at a pressure of 2 bar for 15 minutes. The eye-washing by means of the flow-rate reducer supplies a flow of 12 l/min under pressures from 1 to 9 bar. Water inlet is Ø1/2” and outlet Ø1-1/4”. The product is fixed to the wall with the support and should be positioned so that the spigots are located at a height between 80 and 115 cm.